Description

Fan coil unit equipment has evolved steadily over the past few decades into a highly developed and effective means of providing air conditioning for a building. As with any technology there is the potential for serious problems if products are applied or installed  incorrectly, thus making professional guidance essential.

Recent legislation concerning energy reduction and carbon emissions further highlights the importance of correct design, installation, commissioning and maintenance to achieve efficient air conditioning and avoid energy waste.

This Technical Memorandum sets out to describe all aspects of fan coil unit technology and provides manufacturers, designers, site personnel and operators a comprehensive guide.

Contents:

1. Introduction to fan coil unit technology

2. Fan coil unit principles

2.1          Introduction
2.2          Water-side fan coil units
2.3          Air-side fan coil units
2.4          Casing
2.5          Fans
2.6          Coils
2.7          Filters
2.8          Fan coil unit plenums
2.9          Controls
2.10        Energy considerations

3. Design of fan coil unit installations

3.1          Introduction

3.2          Ceiling mounted, ducted chassis units
3.3          Vertically mounted and cased fan coil units
3.4          Sizing of fan coil units
3.5          Air terminal devices
3.6          Pipework systems
3.7          Controls
3.8          Acoustics

4. Selection of fan coil units

4.1          Introduction
4.2          Type of unit
4.3          Performance parameters
4.4          Commercial considerations
4.5          Specifications

5. Installation

5.1          Health and safety
5.2          Delivery and storage
5.3          Fitting of units
5.4          Ductwork connections
5.5          Pipework connections
5.6          Condensate removal
5.7          Electrical and controls wiring
5.8          False ceilings

6. Site commissioning

6.1          Pre-commissioning
6.2          Commissioning the air distribution system
6.3          Commissioning the water system
6.4          Condensate drainage system
6.5          Control system commissioning
6.6          Acoustic performance
6.7          Thermal output
6.8          Witnessing
6.9          Documentation and handover

7. Servicing and maintenance

7.1          Introduction
7.2          Servicing
7.3          Maintenance and repair
7.4          Energy performance inspections

8. Laboratory testing

8.1          Introduction
8.2          Air-side criteria
8.3          Water-side criteria
8.4          Acoustic performance
8.5          Electrical and control systems
8.6          Product safety testing
8.7          Test facilities
8.8          Testing rationale

References