About the exam
Delegates will not be excluded if they haven’t undergone training with CIBSE, although are expected to have either taken training with another provider or have a sufficient knowledge in order to sit the exam.
About the Low Carbon Consultant Design Examination
The exam will now be hosted on the Online Learning Portal.
If you are a new user to CIBSE, please contact us on 020 8772 3660 or email us at email@example.com to get you started.
Alternatively, please follow the set up instructions below:
To set up the MyCIBSE Portal create a username from your desired email address and create a password. Then login to the Online Learning Portal with the same credentials as used to create your MyCIBSE Portal.
Once you have successfully logged in to both portals, please contact us on 020 8772 3660 or email us at firstname.lastname@example.org to activate your account.
If you are already a user of MyCIBSE but have not yet accessed our Online Learning Portal, please login to the Online Learning Portal with the same credentials as used for your MyCIBSE Portal.
Once you have successfully logged in, please contact us on 020 8772 3660 or email us at email@example.com to active your account.
When your attendance on the course has been confirmed you will have access to the exam via your CIBSE Online Learning Portal under the tab ‘My Learning’. This will be available to access for 14 days from the last day of your course.
If there is any reason that you should not be able to complete the exam online, please contact a member of the training team at firstname.lastname@example.org to make alternative arrangements.
The exam is 'Open Book' - texts allowed are:
- Approved Documents L2A and L2B: CLG guide/ Section 6 Regs
- The course presentation (for those who have attended the CIBSE training)
There are 50 multiple choice questions (worth two marks each) The exam is marked out of 100 and the pass mark is 70%
Multiple choice questions only have one right answer -candidates should note that some questions offer options for 'all of the above' or 'none of the above' so the questions should be read carefully. Questions with more than one option ticked will be marked as wrong.
The questions will cover the whole syllabus, some of which is only covered in the pre-reading. Some of the questions will require good engineering judgement. Some of the questions will require a calculation. You will need a calculator.
The time allowed is 90 minutes.
If candidates have not prepared thoroughly by completing the pre-reading and understanding the training course, you may find it hard to finish the exam. Please let us know in advance if you have any relevant special needs or requirements.
About the Part L Update Examination
A link to the online Part L exam will be sent to delegates once the booking process has been completed.
The exam is 'Open Book' - texts allowed are:
- Approved Documents L2A and L2B: CLG guide
- The course hand-outs (for those who have attended the CIBSE training)
Only hard copy texts are allowed; documents loaded onto laptops are not allowed in the exam. There are 20 multiple choice questions (worth one mark each) the pass mark is 70%. The time allowed is 40 minutes - you will be given a 'ten minute warning'. Standard examination rules apply - no conferring during the exam room.
Multiple choice questions only have one right answer - candidates should note that some questions offer options for 'all of the above' or 'none of the above' so the questions should be read carefully.
Questions will cover the Part L regulations including the 2013 updates. Some of the questions will require good engineering judgement.
You can go back to previous questions if you need to change an answer. The exam has a timer that will automatically log you out when time is up. The exam can be sat at a time that suits you however once you have started you cannot pause or restart the exam.
Although the exam is 'open book' it is not designed to allow candidates to look up all the answers - material allowed should be regarded as reference. If candidates have not prepared thoroughly by completing the pre-reading and understanding the training course, you may find it hard to finish the exam. Please let us know in advance if you have any relevant special needs or requirements.
Notification of examination results
All candidates are notified of the result of the examination by either letter or email. Such notification will normally be sent within 2 weeks of the examination unless the result is the subject of a complaint.
Delegates are offered the opportunity of one re sit at no charge if they fail the exam. The re sits are arranged with the training manager. If the re sit is not successful we recommend the candidate takes some further training before trying again. If they would like to re sit a further time then there is a charge associated with this. There is no limit to the number of times a candidate can re sit.
You can ask CIBSE to make an enquiry into your examination results if you think:
- A mistake has been made working out the result
- There are issues with the exam questions
- Security has been breached
Appeals should be made in writing at least 2 weeks from the date the results are received and must be made in writing to CIBSE. The paper will be reassessed by a suitably qualified person and member of CIBSE who has not been involved in the original marking process. You will be informed in writing of the outcome of the appeal.
Examination/ Security concerns may be submitted in writing to:
Training & Events
222 Balham High Road
London, SW12 9BS
If you want to submit a concern anonymously, you may do so; however, please be sure to include as much information as you can about your situation because we will not be able to contact you for additional details. For example, if describing an incident at a test center, please state the location and time of the event and as many specific details about the event as possible.