Mandik UK Ltd

Module 1 Is a 90M Fire Damper CPD technical training presentation (covering FD & MFD) which explains and encourages conversations on topics including - • Fire Damper standards • Fire Damper classifications • What is the difference between an MFSD, FD, MFD or SCD • Fire Damper compliance - how to read a DoP • How to make a correct damper selection • Breakaway connections • What is a non-standard damper application? • Why do you need an insulated damper? • What is an EXAP? • Can a 120M (FD or MFD) damper be installed in a 30M wall? • What are standard constructions and what are non-standard Constructions? • Why are there challenges around MMC and standard fire testing • What is the minimum damper spacing • MFD & FD Installation & good practices Module 2 Is a 60M Smoke Control damper technical training presentation (covering SCD’s), which builds directly on the knowledge gained in module 1 and explains and encourages dialogue on topics such as - • Smoke Control Damper standards • Smoke Control Damper classifications • Smoke Control Damper compliance - how to read a DoP • How to select the correct SCD • Does the Duct and Damper need to be tested together? • Why you need an insulated SCD • Do interfaces need to be tested with the damper? • What are standard constructions and what are non- Standard constructions • Do I need a single or multi compartment damper? • Do I need AA or MA operation • Can an MFD be used in a SCD system? • Does BS 8519 affect damper selection? • What should be included in a SCD test and detailed on a DoP • SCD Installation & good practices Module 3 Is a 60M Smoke Damper Control system technical CPD presentation (for MFD & SCD) on regulations, this builds directly on the knowledge gained in module's 1 and 2 and encourages conversations in an overlooked area of compliance with topics such as - • How does the Silo approach affect compliance? • Control System compliance BS ISO 21927-9 and System requirements • Can you control an MFD and/or SCD system from a Fire alarm system? • What does AA or MA mean in damper control system? • C&E design and responsibility • Hardwired versus Loop systems • 24V versus 230V systems • Do interfaces and ancillaries need to be fire tested? • Is a firefighter's override required? • Cable specifications to BS 8519 • Commissioning a damper control system