Skip to content

Adveco Ltd

Adveco Ltd


Unit 7&8 Armstrong Mall,
Southwood Business Park,
GU14 0NR

Contact: Bill Sinclair
Tel: 01252 551 540

Categories covered

Types of Courses Speaker(s):

Bill Sinclair: 20+ years experience in commercial H&V industry.

Scott Mason: 10+ years experience in commercial H&V industry.

Summary of Type of Courses and Area of Specialisms Offered:

Sizing Domestic Hot Water Systems for Commercial Environments 
 Rules and principles of practical domestic hot water sizing, including common pitfalls of over-and under-           sizing. 
 Comparisons of sizing estimates and guidelines to real water usage data. 
 A review of the types of systems and the suitability of appliance technologies for various demand profiles. 
 An in-depth analysis of peak periods of demand and sources of demand within buildings. 
 Worked examples tailored to applications suitable for the audience. 

Introduction to Micro-cogeneration Combined Heat and Power Systems 
    An overview of Micro-CHP systems up to 50 kWe. 
    The working principle and operation of CHP appliances. 
    The history and development of the technology up to modern standards. 
    The value and potential benefits of CHP, including contribution to meeting building standards and BREEAM assessment credits. 
    When to use CHP and how to integrate the technology into hot water systems. 

The Impact of CHP on Hot Water Systems 
    What is CHP, and why is it most appropriately used for DHW systems? 
    The impact of CHP on building CO2emissions and local air quality. 
    Sizing hot water systems with CHP preheating for maximum benefit. 
    Configuring and controlling a CHP-led hot water system. 
    Analysis of actual hot water usage based on real temperature data from oper-ational UK buildings. 

Maximising Contribution from Solar Thermal Systems 
    An overview of solar thermal technology, its developments, common issues, and ways to maximise output. 
    Protection against overheating and stagnation using Drainback technology. 
    Review of correct solar thermal system installation and operation. 
    Coverage of Solar Swap and heating load contributions. 
    A look at building regulations and renewable heat incentives (RHI). 

The Effect of Lower Carbon Intensity Electricity on Renewable Technologies for Existing Buildings 
    An overview of current U.K. carbon legislation and future energy scenarios. 
    Analysis of grid energy demands and carbon factors, as well as future emission targets. 
    A look at the range of low carbon technologies available and their potential impacts on carbon emissions. 
    Discussion of how to select the correct low carbon technology

Target Audience:

Building Services Engineers, Mechanical Engineers, Public Health Engineers

Duration of Courses:

45 minute presentation with Q&A.

Course Formats:

E-learnings, Seminars

Course attendance fee range (if applicable)